(Replying to PARENT post)

Bloody hell Wired.

Blu Tack was invented in Leicester, and Bostik still make it there. It's reusable and doesn't set or cure, though it deteriorates a bit after a decade in a drawer. Can repair pretty much nothing, but handy for sticking posters to walls. :)

Sugru is/was a silicone putty that cures after a few minutes in air, and expires in a few months in the packet. Seemed terrible value for money based on the tiny packet I bought so I'd never buy again.

At least with two part putties you can keep plenty in a drawer, for years, they don't cure until you've mixed them and cost a fraction of Sugru.

Edit: Well this provoked quite the discussion. If you're looking for repair putty the two main UK brands I know are: Araldite (Now a US brand, mainly DIY and automotive, also epoxy adhesives), and Milliput.com (Epoxy modelling clay, perfect for repairs to plastics, steel etc. Comes in a few grades and colours), with shelf life in decades. Milliput are Welsh. :)

๐Ÿ‘คoldcynic๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

"expires in a few months in the packet"

Yup, I bought Sugru. I used some. I really liked it.... but wasted half of it and simply decided at that point to not buy it again.

I don't want to have to buy it within months of needing it. I want to store it and use it as needed for as long as I have it.

๐Ÿ‘คduxup๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Seconding two part epoxy putty as a thing more people should know about, I've used it to repair several sorts of broken plastic clip, fill small holes in walls, etc.
๐Ÿ‘คpjc50๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

if people are looking for another product that's mould-able, good for repairs and doesn't go off (but also doesn't stick posters to walls) then I've done great things with Polymorph.

It's a thermoplastic that sets solid can be fused together and reused by heating it to 62 degrees centigrade. It's also non toxic which makes it great for kids.

http://www.preproom.org/equipment/eq.aspx?eqID=5105

I always used to get it from Maplin and can't find much online, but it looks like there's a whole range of thermoplastics now available.

๐Ÿ‘คBuildTheRobots๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Also, the inventor and CEO is "Irish".
๐Ÿ‘คrusk๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

It expires after a few months in the packet?

RIP my spare Sugru.

๐Ÿ‘คDjvacto๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Furthermore, Sugru is Irish (which is no longer part of the U.K., last time I checked)
๐Ÿ‘คiserkempf๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Whatever happened to good-old two-part JB Weld? Is that just a regional product? I thought everyone knew about it.
๐Ÿ‘คtossandturn๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

I'd be very interested to find the equivalent of two part epoxy Sugru, or in other words a rubbery Milliput. Any suggestions?

Coincidentally, such was my need only yesterday. I thought first of Sugru, balked at the price and delivery time as usual, looked into making some 'Oogoo' (silicon sealant mixed with corn flour) and funnily enough I ended up using some Sugru that's been in my fridge for 5 years, which although slightly crumblier than I remember on first handling, did the job fine in the end.

๐Ÿ‘คhanoz๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

I purchased Sugru years ago to form a small cover on the edge of my MacBook Pro's palm rest because it was uncomfortably sharp. Basically a thin line of Sugru from edge to edge.

It worked well, and it's still there and functioning 5 years later.

When the two tiny packets arrived I thought it was quite expensive for what it was! I only ever used one packet, the other stayed in the fridge door where I just found it and it is rock hard. So I guess my next purchase would be for this Blu Tack.

๐Ÿ‘คjtreminio๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

> Can repair pretty much nothing, but handy for sticking posters to walls.

idk, it kept a roofing tile in place for a bloody long time until my mother really lost patience with the sight of bluetac on the roof

๐Ÿ‘คNtrails๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Sugru is kind of pricey, but I've yet to find any other adhesive material with the same properties. I've repaired winter shoes, cables, headphones and more with it. It's super easy to work with. I almost wish I could buy smaller quantities economically, because after I repair the one or two things I buy it for, it usually sits unused too long and expires by the time I actually need it again.

Definitely a niche product, but a niche that isn't filled by anything else.

๐Ÿ‘คAsooka๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

That's the reason I never bought any more. I needed it about once a year and it went off after a few months. I really must empty my fridge.
๐Ÿ‘คAngostura๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

> Can repair pretty much nothing, but handy for sticking posters to walls.

Also good for getting tiny glass shards out of carpets and such.

๐Ÿ‘คdzhiurgis๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0

(Replying to PARENT post)

Keep sugru in the fridge. Lasts a lot longer.
๐Ÿ‘คjonhendry18๐Ÿ•‘7y๐Ÿ”ผ0๐Ÿ—จ๏ธ0